Our incubators are manufactured from 10mm expanded pvc plastic sheets, thermally welded and formed for great strength. Heavy duty hardware, very lightweight, approx 24"hx24"deepx19"wide. This unit is designed for "shoebox size tubs, but the shelves are removable for taller tubs. Models are $375.00 without a thermostat.

We use and recommend the Helix DBS1000 pulse proportional thermostat and the Herpstat by Spyder Robotics.

WHY A NATURES SPIRIT INCUBATOR?
Ours is the first midsized, cabinet style incubator available that is priced for both the professional breeder and the amateur hobbyist. These incubators have been used to hatch everything from leopard geckos and bearded dragons to chondros, womas and ball pythons. We have been using these incubators for our own collections for many years. Our incubators are being used by zoos and breeders all over the united states.
All units are individually manufactured after your order is placed. Once your order is placed we begin the manufacturing process as quickly as possible. Usually in less than three weeks. However, this is a highly seasonal product and there are times when it can be longer. We will always let you know the wait time for any of our products. Before the peak egg laying season we recommend that you anticipate your needs and order early for faster completion time. If you have an odd sized tub or special need for your incubator dimensions, feel free to contact us and we can determine if a custom unit is possible. Please allow more time for custom units.
All models have an air circulating fan to provide very little temperature fluctuation from the top shelf to the bottom.
Large 1/4" thick Plexiglas doors allow viewing your clutches without opening the door.
Heavy duty latches keep door closed securely.
Space saving design, and very lightweight.
All models have 2 removable shelves.
Economical - 1 of the Natures Spirit incubators handles far more eggs than several of the styrofoam models. These incubators are designed to be used with a deli cup/shoebox type container with a moistened incubation medium like vermiculite or perlite to create the ideal high humidity environment you need for your eggs.

ABOUT THE HELIX DBS1000 THERMOSTAT

The Helix DBS1000 is a proportional controller mimics nature by continuously adjusting the amount of power delivered to the heater, as opposed to simply turning ON and OFF as done by other manufacturers. The new digital interface is simple and easy to use. Set the desired temperature using just one button. Check the programmed set-temperature anytime by simply pressing the button. There is no ‘trial and error’ common with analog systems that cannot display the set-temperature. You get the desired temperature the first time you program the unit. The programmed set-temperature values are stored in a type of memory that keeps its values even when power goes out, thus settings will never be lost. This system is designed to be the utmost in reliability in maintaining the ultimate health of your special animal. The system even has built-in fault checking that will let you know if the temperature probe is damaged. The new LED display is highly visible from across the room—even at night. The display has a resolution of 1.0 degrees Farenheight, but the internal resolution is calculated to 0.25 degrees Farenheight.


ABOUT THE HERPSTAT BY SPYDER ROBOTICS

• Proportional heating constantly monitors and adjusts amount of heat necessary to maintain a target temperature (usable range from 50 degrees F to 110 degrees F or 10 degrees C to 45 degrees C).
• Can also be used in non proportional, on/off mode.
• Night Drop Capability when used with optional cable.
• Precision Sensor with internal reolution of .1125 degrees F and is accurate to +/- .9 degrees F.
• Allows display and setting in tenths of a degree.
• Sensor matching allows the user to digitally calibrate the sensor output to match other equipment.
• High/low temperature tracking.
• All settings are retained in memory if power is lost.
• Easy to read 3 digit LED display with heat output indicator.
• Sensor can be easily replaced if necessary.
• Easily mounts to incubator with built in hanger.
• Internal error detection shuts off heat if sensor fails or is disconnected.
  500 watt output.
• 1 year limited warranty through Spyder Robotics.

You can e-mail us at our e-mail link, call us at 269-649-9377 or use our convenient shopping cart to order. We accept paypal, visa or mastercard. All checks or money orders must clear before shipping.